[Answer ID: 12178]

About factory default IP addresses (Wireless AP)

Created 04/07/2011 01:28  |   Updated 04/23/2014 07:04

Factory default IP addresses are different depending on the product.
They are also different depending on the version of the firmware for some products.
Refer to the chart below for the details.

 

Wireless main units (for households / SOHO)

 

When the set model is a router model, the IP address setting is for LAN.

Product name IP address Notes
WHR-G300N 192.168.11.1 192.168.11.100: in the bridge mode (when the router is switched OFF)
Acquired by DHCP: in the bridge mode (when the router is switched AUTO)
WHR-G54S 192.168.11.1 192.168.11.100 : in the bridge mode
WHR-HP-G300N 192.168.11.1 192.168.11.100: in the bridge mode (when the router is switched OFF)
Acquired by DHCP: in the bridge mode (when the router is switched AUTO)
WHR-HP-G54 192.168.11.1 192.168.11.100: in the bridge mode
The factory default IP address of WHR-HP-G54/EK is in the bridge mode
WHR-HP-GN 192.168.11.1 192.168.11.100: in the bridge mode (when the router is switched OFF)
Acquired by DHCP: in the bridge mode (when the router is switched AUTO)
WZR-AGL300NH 192.168.11.1 192.168.11.100: in the bridge mode
WZR-HP-G300NH 192.168.11.1 192.168.11.100: in the bridge mode (when the router is switched OFF)
Acquired by DHCP: in the bridge mode (when the router is switched AUTO)
WZR2-G300N 192.168.11.1 192.168.11.100: in the bridge mode


Details


Products

OS / Hardware

Was this answer helpful?
Please tell us how we can make this answer more useful.

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID