[Answer ID: 14303]
DriveStation Quattro DIAG codes
Created 06/13/2012 07:36 | Updated 06/15/2012 07:28
This is a list for system error or maintenance alert on DriveStation Quattro.
| LED | Sound | Meaning | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N/A | 3 short Beeps, with a 1 second pause | The fan is not running | |||||||||||||
| N/A | Continuous short beeps | The unit is overheating, but the fan is running | |||||||||||||
| Hard Drive is Red | Long 3 second beep | The hard drive has failed, or is disconnected. There will be a long 3 second beep for each hard drive status LED illuminated in red. | |||||||||||||
| All are illuminated red | 1 Long 3 second beep | A Hard drive is set to slave. All the hard drives need to be set to Master or Single | |||||||||||||
| Blinking Red | N/A | The unit is rebuilding the array. When it is done it will beep. The unit can be connected to a computer while it is rebuilding the array, but it will take longer to rebuild the array.
|
Details
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.