[Answer ID: 14686]
How to: Enable and set jumbo frame (Ethernet frame) size for LinkStation
Created 09/24/2012 07:46 | Updated 04/03/2013 06:13
Enabling jumbo frames support will greatly improve read/write operation to NAS device on the LAN network.
However, jumbo frame setting may not be supported by some routers and host PCs. Internet access may not be possible due to MTU setting variation and limitation of intermediate routers.
Generally, clients with Gigabit Ethernet adapters can support jumbo frames on the same LAN segment.
Refer to adapter configuration settings to check your host PC's adapter settings before changing the default frame size.
To configure jumbo frame (adjust Ethernet frame), follow the steps bellow:
| 1. |
Log in to administration Web UI.
|
| 2. |
Navigate to [Network] - [Settings].
|
| 3. |
Under the "Ethernet Frame Size", click [Modify Settings].
|
| 4. |
Select the frame size from drop down list, then click [Save].
|
Details
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.