[Answer ID: 15152]
LinkStation 400 - How to Restore the LinkStation to its Factory Defaults
Created 07/17/2013 05:36 | Updated 08/30/2013 07:19
To initialize the LinkStation to its factory default, follow this procedure.
Initializing with the Function Button
Notes:
| • | The following settings will be initialized: admin username, admin password, IP address, and Ethernet frame size. |
| • | To disable initializing username and password, navigate to [Management] - [Restore/Erase] - [Init Button Settings] and select "Keep current admin username and password". |
| 1. |
Turn off the LinkStation.
|
| 2. |
Turn the LinkStation on with holding down the function button.
|
| 3. |
Press the function button again while the LED is flashing.
|
The LinkStation will reboot automatically. When the LED changes to a steady white, the initialization has been done.
Initializing from Settings
| Note: | This initializes the LinkStation’s settings. All settings are restored to their factory defaults. Saved data is not erased. |
| 1. |
In Advanced Settings, click [Management].
|
| 2. |
Click
|
| 3. |
Click [Initialize LinkStation].
|
| 4. |
The "Confirm Operation" screen will open. Enter the displayed number, then click [OK].
|
| 5. |
The LinkStation will be restored to its factory default settings.
|
How to Open Settings
to the right of "Restore/Erase".
Details
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.