[Answer ID: 9760]

Why does the product NOT start with "Standby zzz..." shown on the LCD display?

Created 02/15/2011 07:52  |   Updated 09/22/2011 03:03

Cause 1: Auto Power Mode is activated.
Countermeasure 1: Check the setting of Auto Power Mode.

If the Auto Power Mode switch is set to "AUTO", and the PC with NAS Navigator2 installed is not running on the network, the TeraStation will turn off.

  1. Set the Auto Power Mode switch to "MANUAL".
  2. Start the computer with NAS Navigator2 installed.

Cause 2: Sleep Timer function is activated.
Countermeasure 2: Check the setting of Sleep Timer.

If Sleep Timer is set with the Auto Power Mode switch set to "MANUAL", TeraStation turns off at the specified time.

Sleep Timer cannot be used with the Auto Power Mode switch set to "AUTO".
Check/change the time and settings of Sleep Timer.

  1. In the Web Admin interface, navigate to [System]-[Power Management]-[Sleep Timer].
  2. Click [Modify Settings].
  3. Specify [Timer Interval], [Wake up at], and [Begin Sleep at], and then click [Save] when done.



OS / Hardware

Was this answer helpful?
Please tell us how we can make this answer more useful.

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID