FAQs | Find Answers

Search Results

Results 11 - 20 of 120

Recommended Links
  1. How do I stop a multiple SSID?
    [Answer ID: 14069]
    This happens because of the function you can set different security level to different SSID.You can connect the devices which support different security level to one router at the same time....
  2. Forgotten password / Reset for Wireless devices
    [Answer ID: 14125]
    The only solution is to set the unit back to default settings. Afterwards all settings you made are lost and the password is the default one.Wireless Routers / Access points and Ethernet converters -...
  3. How can I find out the SSID and encryption key of the AirStation?
    [Answer ID: 14246]
    To find out the SSID and Encryption key Refer to label on the side of the unit.The initial (factory reset) values of SSID and Encryption key are printed on the label.For example, the label on WZR-HP-AG300H is shown bellow:...
  4. How to : MAC OS client can write to hard disk (NAS) device mounted on router with professional Firmware.
    [Answer ID: 14455]
    To have write access from MAC, re-check file sharing settings. In System Preferences , click "Sharing"  and turn on "Windows Sharing" for 10.4 or in 10.5 “Share files and folders using SMB.”...
  5. How to : Setup a wired bridge between two Buffalo routers using Professional Firmware ?
    [Answer ID: 14460]
     The simplest way to setup a wired bridge connection between a  Primary router that is connected to Internet and a secondary router is to configure the secondary router as a "Bridge" ....
  6. How to : Change wireless Channel on User-Friendly Firmware.
    [Answer ID: 14479]
     1-Connect PC to router and Open WEB UI in browser : 192.168.11.1.2- Go to "Wireless Config" | Basic Tab     Select channel from "Wireless Channel"  drop down menu. Alternatively, 1- From Easy Setup select "Wireless SSID..." or "Basic Wireless setup" ...
  7. How to : Access management WEB UI of WLI-H4-D1300 .
    [Answer ID: 14484]
    How to : Access management WEB UI of  WLI-H4-D1300  . WLI-H4-D1300 AirStation is an AC1300 / N450 4-Port Gigabit Dual Band Wireless Ethernet Bridge.  Default IP address is 1.1.1.1Default User Name : admin...
  8. How to: Limit Wireless connection to a list of specific clients (user Friendly Firmware)..
    [Answer ID: 14603]
     To enhance security against unwanted network visitors, wireless connection to the wireless router can be limited to specific client MAC address.To reject unwanted visitors or clients, enable MAC filter function....
  9. How to: Enable MAC Filter (user Friendly Firmware) .
    [Answer ID: 14604]
     By enabling MAC filter, wireless connection to the wireless router can be limited to specific list of MAC addresses.To reject unwanted visitors or clients, enable MAC filter function. Follow the instructions bellow to limit wireless connection based on client MAC address....
  10. How to : Access management WEB UI of WLI-H4-D1300 .
    [Answer ID: 14605]
    WLI-H4-D1300 AirStation is an AC1300 / N450 4-Port Gigabit Dual Band Wireless Ethernet Bridge.Default IP address is 1.1.1.1Default User Name : adminDefault Password : passwordTurn on WLI-H4-D1300 power. Look for the push button power switch on the back of the unit....
< Previous  1  2  3  4  5  6  7  8  9  Next >

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID