FAQs | Find Answers

Search Results

Results 71 - 80 of 120

Recommended Links
  1. WDS Bridging
    [Answer ID: 14138]
    I. Physical SetupHave the routers, and/or Access Points next to one another, and physically  plugged into each other via the LAN connection.Change the "Access Point" unit into Bridged mode by changing the phsyical switch from "auto" to "bridge"....
  2. How can I fix a suden loss of internet connection ?
    [Answer ID: 14437]
     In case of sudden Internet connection loss, start by inspecting your wired connection to the network equipment.PROCEDURE 1 - Make sure Wired LAN and Power cables are securely connected....
  3. Wireless N Common Problems
    [Answer ID: 14169]
    LED ActivityMonitoring LED activity helps identify problems.Power LED should be Green,Wireless LED should be Green if the line is active. If is it blinking Green, wireless communication is active....
  4. How do I set the router with Fixed IP address which the ISP provided?
    [Answer ID: 14026]
    If "No server was detected" screen was displayed while initial setup, your network environment is established with Fixed IP address.The IP address and other parameters are provided from ISP by an e-mail or any documents....
  5. Configure port forwarding on WHR wireless routers
    [Answer ID: 14230]
    Port forwarding on the WHR is done by going to [Advanced] > [Network Config] > [NAT] and clicking on [Edit NAT Table].Enter a name for the group, such as "WebServer".Leave WAN Side IP address set to "AirStation's WAN IP Address"....
  6. How to: connect WLAE to PC by wired Ethernet?
    [Answer ID: 14483]
     WALE factory preset SSID and Encryption key Refer to WALE factory preset tag attached to the unit. Refer to configuration screen (WEB management interface)2. To view WEB UI , connect WLAE-AG300N power cord to power outlet....
  7. How to: Find out and confirm SSID and Encryption key of WLAE-AG300N ?
    [Answer ID: 14487]
     WALE factory preset SSID and Encryption key Refer to WALE factory preset tag attached to the unit. Refer to configuration screen (WEB management interface)2. To view WEB UI , connect WLAE-AG300N power cord to power outlet....
  8. How to: setup static IP for wireless client (PC, Camera or TV etc) that will work with Buffalo Router.
    [Answer ID: 14583]
    1- Select a LAN IP address that is unused. The LAN IP address should be out side of DHCP address range.The default Router IP is 192.168.11.1 . DHCP range in User Friendly firmware is 192.168.11.2 through 192.168.11.65...
  9. How to: Setup PC IP address automatically through DHCP ( Windows 7).
    [Answer ID: 14584]
     Windows Vista/7Step 1:Click the Start button, followed by  Control Panel.Step 2:           Click  View network status and tasks Step 3: Click Change adapter settings.Step 5: Right Click on the adapter...
  10. How to: determine WLI-H4-D1300 wireless connection status, channel and speed ?
    [Answer ID: 14585]
     1) Open browser and log in to the management WEB UI2 ) Navigate to "Diagnostic" ->  "System Info" tab.  3) See Wireless details : 
< Previous  4  5  6  7  8  9  10  11  12  Next >

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID